Yuanben Sensor Engaged in magnetoelectric sensor design & production, a professional high-tech magnetic sensor manufacturer.
Capacitive angle sensor-Single-channel rotational Angle displacement sensor with external actuator - ADS-1000 series
Description
The ADS series Hall effect rotational Angle displacement sensors offer non-contact sensing at a competitive cost in harsh transportation and industrial applications.
Multiple working ranges from 60° to 360° tolerate overtravel and allow for use in most common applications. The input voltage range for the low-voltage and high-voltage versions is from 4.5Vdc to 10Vdc.
Characteristics
True non-contact operation
Infinite Rotation (RADS Series)
Solid-state Hall effect technology
Robust IP69K sealed package with integrated connector
Automotive-grade EMI/EMC testing, integrated reverse polarity and short-circuit protection
Industry-standard AMP termination, 32mm mounting pitch, North American or European pin arrangement style and compact package
A variety of working ranges up to 360°
Application
Transportation
Position and motion detection (pedals, throttle, gear shifting, joysticks, steering, connecting rods and hooks) in trucks, buses, off-road vehicles, cranes and industrial/construction/agricultural vehicles and equipment
Hanging/kneeling position (buses, trucks)
Inclined/pruning position (Marine engines, farming equipment)
Industry
Valve control
HVAC damper control
Pivot control of irrigation equipment
Technical Parameters
Table 1. Electrical Specifications
|
Characteristics |
ADS Series (Low Voltage) |
|
Power supply voltage |
5 ±0.5 Vdc |
|
The supply current is normal. |
Maximum 20 mA |
|
During the short circuit period of the output to ground |
Maximum 25 mA |
|
Output: Standard |
0.5Vdc to 4.5Vdc ratio - metric |
|
pour |
4.5Vdc to 0.5Vdc ratio - metric |
|
Output signal delay |
4 ms (typical value) |
|
Reverse polarity protection |
-10 volts direct current |
|
Overvoltage protection |
10-volt direct current |
|
Output is short-circuited to ground |
Continuous |
|
Resolution |
12 digits |
|
Output load resistance (pulled down to ground) |
Typical value of 10 kOhm |
|
EMI: Radiated Immunity |
From 200 MHz to 1000 MHz, 11452- 2,100 V/m per ISO |
|
EMI: Conducted Immunity |
100 mA BCI/ISO11452-4, from 1 MHz to 200 MHz |
Table 2. Mechanical Specifications
|
Characteristics |
ADS Series (Low Voltage) |
|
Life expectancy |
Infinite rotation |
|
Air gap: Bare magnetic actuator |
3.00 mm ±0.5 mm [0.12 inches ±0.02 inches] |
|
Air gap: Magnet actuator with shell |
2.00 mm ±0.5 mm [0.08 inches ±0.02 inches] |
|
Imbalance |
Maximum 2.002.00mm [0.08in] |
|
Materials |
|
|
Magnet |
Neodymium iron boron |
|
Sensor housing |
PBT plastic |
|
Encapsulated magnets are used to encapsulate and form sensors |
PPS plastic |
|
Encapsulate magnetic bushing sensor bushing |
Brass |
|
Matching connector |
AMP Super Seal 282087-1 |
|
Mechanical terminal limiter |
Don't |
|
Installation screw size: From the sensor to the installation surface |
Non-magnetic, stainless steel M4 X 0.7 screws and 8 mm [0.31 in] outer diameter washers |
|
It is equipped with a magnetic actuator for the actuator installation shaft |
Non-magnetic, stainless steel M3 X 0.5 common cup tip set screw |
|
Approval |
"CE Certification" |
Table 3. Environmental Specifications
|
Characteristics |
RADS Series (Low Voltage) |
|
Working temperature range |
-40 °C to 125 °C [-40 °F to 257 °F] |
|
Protection grade |
IP69K protection grade |
|
Medium compatibility |
Heavy transportation fluid |
|
Impact 1 |
Peak value of 50 G |
|
Vibration 1 |
Peak value of 20 G |
|
Salt spray |
Bare magnet: 96 hours, in compliance with ASTM B117 standard |
|
Sealed magnet: 240 hours, in compliance with ASTM B117 |
Electrical Definitions
Cable
Connector
It can be customized as required.
For more information, please contact us.
Get in touch with us