Yuanben Sensor Engaged in magnetoelectric sensor design & production, a professional high-tech magnetic sensor manufacturer.
Optical angle sensor-Dual-channel Angle sensor-ADS-003B
Description
The Angle sensor is used to measure the Angle between 30° and 120°. It is based on the non-contact Hall measurement principle, is highly reliable, and ensures a long service life. Due to its protection level as high as IP67, this sensor can be reliably used even under harsh environmental conditions. Due to its robustness, this sensor is particularly suitable for measuring the angular position of rotating components in extreme environmental conditions, such as in mobile machinery, cranes, excavators, ships, mobile and fixed garbage compactors, valve controllers, robotics, wind turbines or large medical equipment.
Characteristics
It has a long service life. The non-contact measurement based on the Hall principle is extremely reliable
The Angle measurement range is between 30° and 120°
3.IP67 protection rating, suitable for harsh environmental conditions
4. Operating temperature range: -40 °C to +85 °C
5. Resolution: 0.1°
6. Various current or voltage output signals
7. Infinite short-circuit protection
8. It can be provided together with the operating lever for easy connection
9. EMC stability for the motor vehicle field, with on-site tolerance of 200 V/m
10. Ball bearings (optional sliding bearings)
Application
In mobile machinery, cranes, excavators, ships, mobile and fixed garbage compactors, valve controllers, robotics, wind turbines or large medical equipment.
Technical Parameters
|
Function |
Single-turn Hall effect rotation Angle sensor |
|
Measurement signal |
|
|
Output voltage |
CH1 0.5... 4.5V@5V supply CH2 0.25... 2.25@5V Supplied |
|
Measure the Angle range |
50,60, 90,120,180,270 |
|
Mechanical Angle range |
360° continuous, no mechanical stop |
|
Zero-angle position |
180° relative to the electrical connection |
|
Output signal direction |
Coherent output (Channel 1-2CCW) |
|
Linear |
CH1<±0.5% Measure the Angle range |
|
Temperature coefficient |
Typical value: ±50 ppm/°C |
|
Power supply voltage [Us] |
5V DC ±10% |
|
Overvoltage |
5.5Vdc (continuous), up to 6Vdc @, 25°C for 24 hours |
|
Polarity protection |
Reverse polarity protection up to 6Vdc |
|
Power consumption |
<11mA/ channel (no-load condition) |
|
Load resistance customer input |
>10kOhm |
|
Output protection |
To ground /+10V short circuit 24 hours to +14V (<200s@25°C) |
|
Environment |
|
|
Working temperature |
- 40... +85° C |
|
Storage temperature |
- 40... +85° C |
|
Seal |
IP67 (IPX9K with TE 1-967616-1 cod A connector) or equivalent |
|
Service life |
35M operation -75... +75deg@120rpm |
|
Mechanical requirements |
|
|
Max Running speed |
120转/分 |
|
Relevant normative provisions |
|
|
EMC complies with the ISO 14982 standard |
Horizontal (radiation) : 150V/m... 100V/m BCI method |
|
150mA.100mA ESD: IEC 61000-4-2 air |
|
|
Displacement: ±15kw; Direct contact discharge: ±8kv |
|
|
Environmental test |
Specification for Electronic Environment and Electrical Testing rv8.2 |
|
Application |
Position and motion detection of pedals, throttle, gearshift lever, control lever, connecting rod, suspension and hooks |
Get in touch with us