Yuanben Sensor Engaged in magnetoelectric sensor design & production, a professional high-tech magnetic sensor manufacturer.
Torque angle sensor-Non-contact rotating magnetic Angle sensor-ADS-360
Description
The ADS series Hall effect rotational Angle displacement sensors offer non-contact sensing at a competitive cost in harsh transportation and industrial applications.
Multiple working ranges from 60° to 360° tolerate overtravel and allow for use in most common applications. The input voltage range for the low-voltage and high-voltage versions is from 4.5Vdc to 10Vdc.
The ADS-360 non-contact rotational Angle sensor has a longer lifespan than traditional potentiometers. It can be programmed to output a 0-5V signal from flange 0-360.
Characteristics
True non-contact operation
Infinite Rotation (ADS Series)
Solid-state Hall effect technology
Robust IP69K sealed package with integrated connector
Automotive-grade EMI/EMC testing, integrated reverse polarity and short-circuit protection
Industry-standard AMP termination, 32mm mounting pitch, North American or European pin arrangement style and compact package
A variety of working ranges up to 360°
Application
Transportation
Position and motion detection (pedals, throttle, gear shifting, joysticks, steering, connecting rods and hooks) in trucks, buses, off-road vehicles, cranes and industrial/construction/agricultural vehicles and equipment
Hanging/kneeling position (buses, trucks)
Inclined/pruning position (Marine engines, farming equipment)
Industry
Valve control
HVAC damper control
Pivot control of irrigation equipment
Technical Parameters
General characteristics
|
1 |
Shape and size |
According to the outline drawing and the drawings |
|
2 |
Working temperature range |
-30 to 80 degrees Celsius |
|
3 |
Maintain the temperature range |
-30 to 80 degrees Celsius |
|
4 |
Test conditions |
Room temperature: 5-55° C |
|
Normal humidity: 45-85%RH |
||
|
Normal pressure: 86-106kPa |
Mechanical characteristics
Rotation operation
|
|
Project |
Measurement conditions |
Specification |
|
1 |
Total rotation Angle |
Machine rotation Angle |
360 |
|
2 |
Operating force |
Measure rotational torque |
5-30gf.cm |
|
3 |
Lever stop strength |
The measurement method when rotating to the tail end |
CW or CCW |
|
4 |
Electric Angle |
The rotation Angle of electricity |
360 |
Electrical characteristics
|
1 |
Rated power |
0.05 watts |
|
2 |
Working voltage |
5V DC |
|
3 |
Output voltage |
0-5V DC |
|
4 |
Working current |
Maximum 7mA, 2.5mA when the type is 5Vdc |
|
5 |
Contact noise |
No. |
|
6 |
Independent linearity |
|
|
7 |
Output bandwidth |
10KHz |
|
8 |
Output response time |
3uS |
Endurance
|
|
Project |
Measurement conditions |
Specification |
|
1 |
Heat resistance |
Temperature (80± 2°C) |
The output change decreased by 2%
|
|
Time (96 hours) |
|||
|
Measure after being placed for one hour under normal temperature and humidity |
|||
|
2 |
Moisture-proof property |
Temperature (60± 2°C) |
The output change decreased by 2% |
|
Humidity (90-95%RH) |
|||
|
Time (96 hours) |
|||
|
Measure after being placed for one hour under normal temperature and humidity |
|||
|
3 |
Low-temperature resistance |
Temperature (-30± 2°C) |
The output change decreased by 2%
|
|
Time (96 hours) |
|||
|
Measure after being placed for one hour under normal temperature and humidity |
|||
|
4 |
Life |
Run at a reciprocating speed of 10 to 15 times per minute under normal temperature and humidity conditions without load |
Ten million, electrical |
|
5 |
Immersion test |
10 seconds 160 degrees Celsius |
The output change is less than 1% |
Environment
|
|
Project |
Measurement conditions |
Specification |
|
1
|
ESD Human |
Mil-std-883G Method 3015.7 |
±1000-4000V |
|
Step ± 500V |
|||
|
2 |
Anti-static motor |
EIA/JESD 22-A115 |
±100-300V |
|
Step ± 50V |
Output data
Use the output signal tracking tester
Connector
|
Pin 1 |
Direct current |
|
Pin 2 |
Output |
|
Pin 3 |
Grounding |
Get in touch with us